500mW High power output, coverage up to 20KM for PTP and PTMP application
Wireless A/N speed up to 300Mbps
Support open frequency from 4920 to 6100 MHz
25dBi Dish Antenna Technology
27dBm High-Power design
2×2 MIMO Technology
Passive PoE Adapter supports up to 100 meter
Atheros AR9344 600MHz Chipset,64MB RAM
10KV Lightning Protection Super TDMA Technology
WI-Tek’s WI-CPE518 Is a 300Mbps 2*2 MIMO Hi-Power outdoor wireless dish bridge for extremely long range point-to-point solutions. It is revolutionary radio-in-feed dish design with high performance, cost-effective and dedicated to long distance wireless network solutions. Featuring the revolutionary WI-TEK TDMA technology, WI-CPE518 is fully compatible with WI-TEK base station and CPE thus greatly improving the network scalability in throughput and latency. With 25dBi dual-polarized dish antenna, a pair of WI-CPE518 can easily build 30km+ long range wireless connection and keep a high speed rate. WI-CPE518 is best applied to rural wireless Internet, wireless backhaul and other industrial wireless solutions.
HARDWARE FEATURES | |
Processor | Atheros AR9344 |
Memory | 64MB SDRAM 8MB Flash |
Interface | 1X10/100BASE-TX
Ethernet Interface |
Power Supply | 24V Passive PoE Adapter
lncluded |
Power Consumption | 8W |
Dimensions (H x W x D ) | 385*385*59mm |
Antenna Type |
Built-in 25dBi Dual-polarized Directional Antenna Horizontal beam width:8degree Vertical beam width:8degree |
Protection | 10KV Lightning Protection |
Enclosure | Die-cast Aluminum
IP65 waterproof Certification |
WIRELESS FEATURES | |
Wireless Standards | 802.11a/n |
Protocol | CSMA/CA,TCP/IP,IPX/SPX,
NetBEUI, DHCP TDMA |
Wireless Mode | AP, WDS, AP-Repeater,
Client, Mesh |
Wireless Speeds | 11a:54M,48M,36M,24M,18M,12M,9M,6Mbps 11n:6.5M,13M,13.5M,19.5M,26M,27M,39M,40.5M,52M,54M,58.5M,65M,81M,108M,121.5M,135M,150M,270M,300Mbps |
Reviews
There are no reviews yet.