Dinstar DAG3000-112S

SPECIFICATIONS :

Physical Interfaces
• Phone ports: 48-112 FXS, RJ45
• Ethernet Interfaces:
• 4*RJ-45 10/100Mbps, RJ-45
•  1 Console Port, Baud Rate 115200bps
Voice & Fax
• G.711A/U law, G.723.1, G.729A/B,G.726,iLBC,AMR
• Comfort Noise Generation(CNG)
• Voice Activity Detection(VAD)
• Echo Cancellation(G.168)
• Adaptive (Dynamic) Jitter Buffer
• Hook Flash
• Programmable Gain Control
• T.38/Pass-through, up to 14.4kbps
• Modem/POS
• DTMF mode: Signal/RFC2833/INBAND
FXS Port 
• Connector: RJ45
• Dial Mode: DTMF and Pulse
• Pulse: 10 and 20 PPS
• Caller ID: DTMF/FSK
• Max Cable Length: 5KM
• Reversed Polarity
Protocol
• SIP V2.0 (RFC 3261,3262,3264)
• IMS/3GPP
• SDP (RFC 2327)
• REFER (RFC 3515)
• RTP/RTCP (RFC 1889,1890)
• STUN (RFC 3489)
• ARP/RARP (RFC 826/903)
• SNTP (RFC 2030)
• DHCP/PPPoE
• TFTP/HTTP/HTTPS
• DNS/DNS SRV (RFC 1706/RFC 2782)
• VLAN 802.1P/802.1Q
Supplement Service
• Call Waiting
• Blind  Transfer
• Attend Transfer
• Call Pickup
• Call Forward on Busy
• Call Forward on No Reply
• Unconditional Call Forward
• Hotline
• Call Hold
• DND
• 3-way conference
• Voicemail
Call & Route
Port Group
IP Trunk
Primary and Secondary SIP Account
32 Inbound Routing
32 Outbound Routing
Number Manipulation
Dial Plan Set
Network Features
• Static IP, PPPoE, DHCP Client
• IPv4, IPv6
• Static/dynamic ARP
• Traffic Shaping
• Voice/Data/Management VLAN
• DIFFServ, ToS
Maintain & Upgrade
• SNMP/TR069
• Auto Provisioning
• Web/Telnet
• Configuration Backup/Restore
• Firmware Upgrade via WEB/TFTP
• Syslog and CDR
• Access Rule List
• Network Capture
• Outward Test(GR909)
• Automatic Time Synchronization
• IVR local Maintenance
• Cloud-based Management
Environment
Power Input:100-240VAC,50-60Hz
Power Consumption:   125W Max
Temperature(Operator): 0 ℃  ~ 45 ℃
(Storage): -20 ℃ ~80 ℃
Humidity: 10%-90%  No Condensation
Dimension & Weight
• 440(L)×300(W)×132(H)mm 7.0kg
Homologation
• CE,FCC
• Elastix  / Broadsoft